12 Volt, 30 Amp Premium AGM Sealed Maintenance Free Battery
500 Cold Cranking Amps
|Height||7 1/4″ w/ foam height adapter|
One year warranty.
You will notice the power of the Renegade battery the first time you hit the starter.
To achieve this power, Renegade battery propriety plates are designed differently ON PURPOSE.
Our design makes it necessary to change the way you may have been maintaining your previous batteries.
As a general rule, if you ride 2-3 times or more a month, you shouldn’t need to do anything else. If you know that you will
not be using the vehicle for more than 30 days, charge the battery for 48 hours and REMOVE the charge.
Repeat every 30 days, until you are back in the seat. Call us, if you have any questions.
We often hear people say “they properly maintained their battery by keeping it on a tender”.
Well, they probably killed the battery sooner than they would have liked.
Renegade batteries are NOT constructed to take a constant 24 hour / 7 day a week charge.
Remember, power in, must equal power out. If you are always putting “power” in, something is going to give.
Here are some simple DO’S and DO NOT’S to help you get the most from your Renegade battery.
DO: Charge the battery every 30 days when not in use.
DO: Check the terminals for cleanliness and loose connections.
DO: Try to keep the battery stored between 62 -82 degrees Fahrenheit.
DO: Check your battery charger voltage regularly.
DON’T: Use an automatic battery charger greater than 1.5 Amp.
DON’T: Use a battery tender after every ride.
DON’T: Ever let the battery voltage drop below 10 Volts.
DON’T: CHARGE FOR MORE THAN 48 HOURS AT A TIME!!!!
FAILURE TO ADHERE TO THESE GUIDELINES, WILL SHORTEN THE LIFE EXPECTANCY OF THE BATTERY, AND MAY VOID THE WARRANTY.
Only the batteries are shipped with your order. Existing cables and connectors must be re-used.
Please note the information listed is for a single battery. Certain models/systems require two or more batteries.
Please verify the amount of batteries you need.